
Main Fullbatten Offshore Grand Soleil 40
Specifications
▲ DESIGN WITH PROSAIL
▲ PRODUCTION SYSTEM: A.R.C. (ADVANCED REGULATION CODE)
▲ USAGE: OFFSHORE SAILING
▲ CUTTING: CROSS CUT
▲ CLOTH : CHALLENGE, BAINBRIDGE, CONTENDER , DIMENSION POLYANT
▲ 4-5 BATTENS (for large sails depends on the design)
▲ SLIDES BATTCARS RUDGERSON FOR THE END BATTENS FITTINGS
▲ FITTINGS FOR FULL BATTEN SYSTEM: RUDGERSON (< 45 Feet Sailboat) – SDA SYSTEM (> 45 Feet Sailboat)
▲ 3 REEFS WITH HARD ANODISED CLAMCLEAT
▲ LEECH T-TAILS
▲ HEADBOARD : RUDGERSON
▲ INOX PRESSED RINGS: RUDGERSON
▲ LEECH LINE: 3-6mm Polyester rope
▲ EXTRA WEBBING REINFORCED ON RINGS BAINBRIDGE
▲ PANEL’S STITCHING: TWINS 3 – STITCH
▲ HIGH ADHESION DOUBLE SIDED SEAMING TAPE ACRYLIC BASED SILICON
▲ THREAD: HEMINGWAY & BARTLETT BONDED DACRON “ANTI-WICK” V – 92 & V – 138
▲ SAIL-BAG: PRINTED NAME AND TYPE OF SAIL AND BOAT
▲ 2 YEARS GUARANTEE
▲ 1 YEAR FREE SERVICE (MATERIALS NOT INCLUDED)
Extra Options :
▲ DRAFT STRIPE
▲ NUMBERS – LETTERS
▲ ONE LINE REEF SYSTEM (2 FIRST REEFS WITH BLOCKS)
▲ DOUBLE SIDE ON REEF LUFF (ring-webbing-ring)


Ocean Sailcloth is the choice of Sailmakers world-wide who wish to offer customers with sails built from quality cloth. Providing both the Inshore & Coastal Yachtsman with sails that will deliver excellent performance & value for many seasons ahead.
▲ Used in a range of applications from Cruising, Club Racing to OEM sail contracts on boats up to 60ft.
▲ Designed for excellent Performance & Durability.
▲ A complete range of weights & constructions to optimise performance in target applications.
▲ High Tenacity Yarns.
▲ Good UV resistance.
▲ Available in High & Low Aspect Styles.

All Purpose/Blade AP styles are engineered to provide good fill strength and at the same time excellent bias stretch resistance.
The ability to resist long term loads comes from the construction of the woven cloth in close harmony with the resin’s ability to reinforce

Fibercon High-Aspect sails are those where the focus of loading is concentrated up the leech of the sail. These sails are recognised by their tall, narrow profile.
Only the highest-quality yarns and tightest weaves are used in these fabrics. By using fill fibers that are larger than the warp yarns, all the crimp is forced into the smaller warp fibres.
This leaves the fill yarns perfectly straight to offset the high leech loads. This weave, which produces the best non-stretch fabric available, also gives excellent bias control for maximum durability.

Headboards
Ιs made in strong high tech composite, this material replaces aluminium. All edges are well rounded. Noextra work on ages for webbing attachments etc. It makes full use of Rutgerson leech blocks and hinges. The headboard is symetrical and can therefore be used in two dufferent positions, either short side up or long side

Headboards
Anodised aluminium alloy headboards.




SDA Fittings
These fittings, manufactured by SDA, are suitable for fully battened mainsails on boats up to 40 ft.

▲ Moulded from reinforced nylon.
▲ All fixings are in light-weight alloy.

Battcars Slides


Battcars Slides



The Super ring
Is a sail ring made of high quality Swedish stainless steel, acid proof steel with unsurpressed strength and grip on the sailcloth. The rings are easier to handle and fit, allowing smaller sizes than normal to be used with the same result.


The Super Ring
Is a sail ring made of high quality Swedish stainless steel, acid proof steel with unsurpressed strength and grip on the sailcloth. The rings are easier to handle and fit, allowing smaller sizes than normal to be used with the same result.

Super Heavy Weight – Tubular
▲Available only on full reels.
▲ All products are nylon except E124 Dacron


Heavy Weight Polyester
▲Strong, low stretch webbing ideal for strapping rings on sails
▲Flat, non_tubular webbing
▲Excellent UV resistance
▲Very low stretch
▲Minimal shrinkage
▲Available only on full reels
