▲ DESIGN WITH PROSAIL
▲ PRODUCTION SYSTEM: A.R.C.(ADVANCED REGULATION CODE)
▲ QUALITY: GRUISING
▲ CUTTING: CROSS CUT
▲ CLOTH: CONTENDER SAILCLOTH / DIMENSION POLYANT / BAINBRIDGE INTERNATIONAL
▲ STAINLESS STEEL RINGS ON TACK / HEAD & CLEW BAINBRIDGE
▲ SNAP SHACKLE LUFF SWEDISH BRASS PISTIL HANKS BAINBRIDGE
▲ LEECH LINE: 3-6mm Polyester rope COUSIN
▲ FOOT LINE: 3-6mm Polyester rope COUSIN
▲ WEBBING Polyester AQUABATTEN
▲ PANEL’S STITCHING: TWINS 3 – STITCH
▲ HIGH ADHESION DOUBLE SIDED SEAMING TAPE ACRYLIC BASED SILICON
▲ WEBBING HEAD & TACK: Polyester AQUABATTEN
▲ THREAD: HEMINGWAY & BARTLETT BONDED DACRON “ANTI-WICK” V – 92 & V – 138
▲ 2 YEARS GUARANTEE
▲ 1 YEAR FREE SERVICE(MATERIALS NOT INCLUDED)
Extra Options :
▲ DRAFT STRIPE
▲ WINDOW T-TAILS
▲ NUMBERS – LETTERS
Ocean Sailcloth is the choice of Sailmakers world-wide who wish to offer customers with sails built from quality cloth. Providing both the Inshore & Coastal Yachtsman with sails that will deliver excellent performance & value for many seasons ahead.
▲ Used in a range of applications from Cruising, Club Racing to OEM sail contracts on boats up to 60ft.
▲ Designed for excellent Performance & Durability.
▲ A complete range of weights & constructions to optimise performance in target applications.
▲ High Tenacity Yarns.
▲ Good UV resistance.
▲ Available in High & Low Aspect Styles.
All Purpose/Blade AP styles are engineered to provide good fill strength and at the same time excellent bias stretch resistance.
The ability to resist long term loads comes from the construction of the woven cloth in close harmony with the resin’s ability to reinforce
Fibercon High-Aspect sails are those where the focus of loading is concentrated up the leech of the sail. These sails are recognised by their tall, narrow profile.
Only the highest-quality yarns and tightest weaves are used in these fabrics. By using fill fibers that are larger than the warp yarns, all the crimp is forced into the smaller warp fibres.
This leaves the fill yarns perfectly straight to offset the high leech loads. This weave, which produces the best non-stretch fabric available, also gives excellent bias control for maximum durability.
Swedish Forged Brass Piston Hanks
Swedish brass jib hanks are renowned world-wide for quality, reliability and ease of fitting.
▲ Forged from marine quality brass and fitted with a stainless steel spring.
▲ B516 has a jaw opening of 25mm and internal dimensions of 25mm x 29mm. It is designed for use over forestay systems for stor jibs, not for large genoas.
Rings 30mm x 6mm Welded 316 Stainless Steel
▲Manufactured from Type 316 stainless steel, which is chemically passivated after welding to reduce the risk of staining.
▲TIG welded maximising strength.
▲Small diameter rings with the same size bar diameter will deform at a higher load, although both will have similar tensile strength.
Maxi Rings – Stainless Steel
▲Bainbridge Maxi Rings are manufactured from Type 316 stainless steel, which is cleaned and passivated after welding to reduce the risk of staining.
▲TIG welded maximises strength.
▲Reinforcing bar reduces potential distortion under high load.
Stainless Steel Welded Hardware
All welded stainless steel fittings are manufactured from type 316 stainless steel, which is chemically cleaned and passivated after welding to reduce the risk of staining. TIG welding maximises strength.
Super Heavy Weight – Tubular
▲Available only on full reels.
▲ All products are nylon except E124 Dacron
Heavy Weight Polyester
▲Strong, low stretch webbing ideal for strapping rings on sails
▲Flat, non_tubular webbing
▲Excellent UV resistance
▲Very low stretch
▲Available only on full reels